Kitchen Ceiling Lights Boxes
Kitchen ceiling lights boxes or junction boxes can be installed on a roof and secured to the drywall. Light boxes or junction boxes come in various types that are normally mounted on the ceiling drywall. A light box can be assembled into a finished ceiling, which requires cutting a hole in the drywall, or it can be installed before the end of the roof. You can mount a light box in the ceiling first determine where it will be located.
Turn the power to the room by turning off the circuit of the circuit box. Decide where the light box will be located and make a mark on the kitchen ceiling lights with a pencil. Keep the light or the junction box on the ceiling upside down and trace around it with a pencil. Draw a smaller circle inside the outline around ½ inch line. This is the line to be cut by the hole.
Drill a small hole inside the inner circumference near the pencil mark. Pull the electrical cables through the hole and then insert the electrical wires in the light box or junction box. Insert the kitchen ceiling lights box or junction box into the hole and tighten the screws with a screwdriver to secure the ceiling. Twisted wire covered in each of the cables.